Overview

Wood Smart Blinds can be considered the contemporary alternative to shutters. The warm and natural appeal of our wood blinds come with decorative valances to cover the headrail, adding to the real wood look that works well with both contemporary and traditional décor.

The blinds provide superior energy efficiency with hardwood slats that resist warping. They are either painted or stained ensure a beautiful, long-lasting finish, while also lightweight and easy to clean.

United Shade Contract is one of the few companies that provide a motorized option, which can raise or lower the blinds with a remote hand control or wall switch, for one or for multiple window coverings. In fact, we have the most multi-tasking remote available for this purpose!

Other control options include a loop pull chain that that can both adjust the height of the blinds and tilt them in one motion. A wand also adjusts the slat angle.

Specs

Measuring

1. Determine if the shade or blind will mount outside the window frame onto the wall (Outside Mount) or if the shade or blind will be mounted inside the window frame (Inside Mount).
2. Outside Mount—Measure the width (across) of the area to be covered. Example: End of frame to end of frame plus 2” added for additional coverage. Inside Mount: Measure the exact opening size. The factory will make any necessary adjustments from your exact measurements to allow for inside clearance and ease of operation.
3. Measure the length (drop) of area to be covered. Example: Top of frame to bottom of frame with an additional 2” for mounting above and below window.

Take precautions with your measurements so entire window area is covered and allowances are made to assure a custom fit. If draperies or valances are already installed be sure your measurement for width allows the shade or blind to fit under the current window treatment.

Inside Mount Measuring Instructions

Inside mount shades and blinds are installed inside the window casing.  Minimum depth requirements vary by headrail type.

• Measure the exact inside width of the window casing from left to right inside edge in three different places.  Record narrowest measurement.
• Measure the exact inside height of the window casing from top to bottom inside edge in three different places.  Record longest measurement. 
• Do NOT take any deductions. Allowances are made at the factory to ensure fit.

Outside Mount Measuring Instructions

Outside mount shades and blinds are installed outside the window casing. The shade or blind will cover an area larger than the window itself.

• Measure the exact width to be covered. Allow enough extra coverage to ensure proper light control and privacy.
• Measure the exact height to be covered. Allow for proper coverage.
• The factory makes No allowances for outside mount.

Installation

• Step 1: Installing end brackets: Determine where to attach each brackets. For outside mounting, position the brackets on the window frame or wall and attach with the proper fasteners. For inside mounting, position top of bracket against inside surface of window frame and attach. Each end bracket uses two screws mounted diagonally. Make sure end brackets are level.
• Installing support brackets (where supplied): Center the support bracket between the two end brackets. Keep the top and back of each support bracket level and aligned with tops and backs of the end brackets. If more than one support bracket is used, space the support brackets evenly across the width of the headrail. Insert screws in the top for an inside mount; insert screws in the back for an outside mount.
• Step 2: Install the Headrail: Slide the headrail into the end brackets and center support. Then close end bracket covers until they click into place.
• Step 3: Install Valance: Your blind includes a valance. Position one valance clip at each end of the headrail, and evenly space any additional clips across the width of the headrail.

Care

Periodic dusting with a feather duster, a soft clean cloth or a vaccum cleaner brush is all Wood Smart Blinds should ever require. If necessary, the blinds can be spot cleaned with a mild soap and water to remove dirt or stains. You should never use any type of liquid or powder cleaner on Wood Smart Blinds as this could stain and discolor the blinds.