Home > Catalog > Smart Pleat > Smart Pleated Shades
Smart Pleated Shades
Smart Pleated Top Down/Bottom Up shades offer two shades in one. A night fabric will pull all the way down to block light, or, it can be moved all the way to the top, exposing a full-length light filtering day shade. Either one can be set in any position for maximum flexibility. These shades are very popular for both residential and commercial use and can now be motorized as well.
Overview
Smart Pleated shades have an exceptional range of colors and light-filtering fabric that work with any décor. The two different fabrics can be different colors and hues if desired. Manual operation is simple and precise with a continuous loop chain that eliminates unsightly dangling and tangling cords that can be a safety issue for young children.
These and other United Shade Contract shades can now be motorized as well, with one or multiple shades controlled by a wall switch or a remote that can operate up to 16 channels— the most sophisticated control device in the industry!
Shopping Cart
Factory Friendly
Technical Data
Warranty
Applications
Specs
| Lift Choices | Motorized or Manual - Pull Cord, Cordloop or Cordless |
| Controls | Yes (Motorized) |
| Fabric Size Choices | 1" or 2" |
| Black out Option | Yes - 1" only |
Measuring
- Determine if the shade or blind will mount outside the window frame onto the wall (Outside Mount) or if the shade or blind will be mounted inside the window frame (Inside Mount).
- Outside Mount—Measure the width (across) of the area to be covered. Example: End of frame to end of frame plus 2” added for additional coverage. Inside Mount: Measure the exact opening size. The factory will make any necessary adjustments from your exact measurements to allow for inside clearance and ease of operation.
- Measure the length (drop) of area to be covered. Example: Top of frame to bottom of frame with an additional 2” for mounting above and below window.
Take precautions with your measurements so entire window area is covered and allowances are made to assure a custom fit. If draperies or valances are already installed be sure your measurement for width allows the shade or blind to fit under the current window treatment.
Inside Mount Measuring Instructions
Inside mount shades and blinds are installed inside the window casing. Minimum depth requirements vary by headrail type.
- Measure the exact inside width of the window casing from left to right inside edge in three different places. Record narrowest measurement.
- Measure the exact inside height of the window casing from top to bottom inside edge in three different places. Record longest measurement.
- Do NOT take any deductions. Allowances are made at the factory to ensure fit.
Outside Mount Measuring Instructions
Outside mount shades and blinds are installed outside the window casing. The shade or blind will cover an area larger than the window itself.
- Measure the exact width to be covered. Allow enough extra coverage to ensure proper light control and privacy
- Measure the exact height to be covered. Allow for proper coverage.
- The factory makes No allowances for outside mount.
Installation
- Determine inside or outside mount.
- Install mounting brackets approximately 3" in from the ends of the shade.
- Install headrail into mounting brackets by tilting front of the headrail in up position. Slide the hook of the mounting brackets into groove of the headrail. Then, push back of the headrail up until it snaps into the bracket.
- Mount cord tensioner if applicable.
Finishes
Colors
Fabrics
Care
Shades should be kept in the closed or up position when not in use, to maintain pleat retention and minimize dirt and soil build-up. Do not store shades in the down position. This may cause some loss of pleat retention if the shades are not operated on a consistent basis.
Shades can be easily cared for by simply dusting or using a vacuum cleaner attachment. Do not use spot remover, household
