Overview

These versatile shades give you everything you want in terms of light filtering, including room darkening fabrics when extra privacy is desired. The sheer fabric really lets you “feel the breeze” with daytime privacy, while gracing any room with the understated sophistication of a high-quality window covering.

The fabric vanes also bolster the sophisticated shear effect and offer excellent open-to-close lighting control with a simple continuous loop cord, providing good visibility when looking through the fully opened vanes and softened interior lighting with the various degrees of closure. The fabric is anti-static, dust and stain resistant, which limits cleaning needs, although we also provide an effective cleaning procedure.

Measuring

1. Determine if the shade or blind will mount outside the window frame onto the wall (Outside Mount) or if the shade or blind will be mounted inside the window frame (Inside Mount).
2. Outside Mount—Measure the width (across) of the area to be covered. Example: End of frame to end of frame plus 2” added for additional coverage. Inside Mount: Measure the exact opening size. The factory will make any necessary adjustments from your exact measurements to allow for inside clearance and ease of operation.
3. Measure the length (drop) of area to be covered. Example: Top of frame to bottom of frame with an additional 2” for mounting above and below window.

Take precautions with your measurements so entire window area is covered and allowances are made to assure a custom fit. If draperies or valances are already installed be sure your measurement for width allows the shade or blind to fit under the current window treatment.

Inside Mount Measuring Instructions

Inside mount shades and blinds are installed inside the window casing.

• Measure the exact insdie width of the window casing from left to right inside edge.
• Measure the exact inside height of the window casing form top to bottom inside edge.
• Do NOT take any deductions. Allowances are made at the factory to ensure fit.

Outside Mount Measuring Instructions

Outside mount shades and blinds are installed outside the window casing. The shade or blind will cover an area larger than the window itself.

• Measure the exact width to be covered. Allow enough extra coverage to ensure proper light control and privacy
• Measure the exact height to be covered. Allow for proper coverage.

Installation

• Install mounting brackets at top of window frame. Mount approximately 3" in from the corner of the window. If you are using the Quick Install option, no brackets are necessary. Simply place screws directly through top rail into the predetermined holes.
• Install headrail into mounting brackets by tilting front of the headrail in up position. Slide the hook of the mounting brackets into groove of the headrail. Then, push back of the headrail up until it snaps into the bracket. Quick Install option will skip this step.
• Install cord retainers with screws approximately 2" below frame on each side.
• If needed, adjust the tension by pulling on the cord string and re-toe a the cord retainer.

Installing Simplicity Shades with Shroud

Shades are not factory adjusted for your shroud. If the shade will not stay in an up position, it is the incorrect size for that shroud.

• Install mounting brackets to top of shroud, mount brackets approximately 3" in from corner of shroud. NOTE: On vista shades you may use 3 mounting brackets. Quick Install Shades require no brackets and install with 2 screws directly through top rail into predetermined holes.
• Install headrail into mounting brackets by tilting front of the headrail in up position. Slide the hook of the mounting brackets into groove of teh headrail. Then, push back of the headrail up until it snaps into the bracket.
• If needed: adjust the tension by re-tying the knot ont he cord retainer or Xmas tree plug. Adjustments should be done on both sides to assure the shade will hang evenly.
• Install cord retainer with screws or Xmas tree plug - Use 1/4" drill bit on the center wall of shroud near bottom.

Care

Shades should be kept in the closed or up position when not in use, to maintain pleat retention and minimize dirt and soil build-up. Do not store shades in the down position. This may cause some loss of pleat retention if the shades are not operated on a consistent basis.

Shades can be easily cared for by simply dusting or using a vacuum cleaner attachment. Do not use spot remover, household