Overview

A natural tie-in to Woven Wood Shades, Woven Wood Folding Doors can complete the natural feel of any room. They basically are woven wood fabric turned sideways and put on a track that slides back and forth, creating a door closure, room divider, or a window-like drapery on a patio door. They can cover huge windows and other big areas and aid energy efficiency. Various colors available.

Specs

Measuring

• Measure width of door opening (left to right measurement)
• Measure length of door opening (top to bottom measurement)
• Please note: Make sure you allow for track, carriers and space for the door to move (track and carriers = 1 ½’). In some cases, your distributor may already take deductions be sure to ask.

Installation

• Installing ceiling track: Place track into door jamb and install the first two screws approximately 12" apart (Don not install all the screws into the track at this point).
• Place the door onto the track by pulling down on the unscrewed portion of the track and inserting the glides into the track.

NOTE: Proceed with installing the remaining screws into the top track.

• Mount back PVC rail to wall jamb.
• Install Door Catch. NOTE: Proper alignment of door catch is critical for a custom fit.
• Remove male part of catch from plastic bag taped to the door.
• Insert screw into the male part of the door catch.
• Snap the male piece into the door catch with the screw facing out.
• Pull the door closed pressing the catch against the door jamb-leaving a small mark where the screw hit.
• Remove the male piece from the door and screw into the door jamb where screw mark was imprinted.

Care

• Doors should be kept inthe closed position when not in use, to maintain pleat retention and minimize dirt and soil build-up.
• Door fabric can be easily cared for by simply dusting or using a vacuum cleaner attachment. Do not use spot remover, household cleaners or detergents to remove soiled spots, as these may cause damage to fabric or loss of color from fading.